| Vertical Linearity Error | ≤3 % |
|---|---|
| Attenuator Error | Every 12 ±1dB |
| Dynamic Range | ≥32 DB |
| Electrical Noise Level | ≤10(frequency Band:1~5MHz)% |
| Flaw Detection Sensitivity Margin | ≥65(2.5Z20N Probe)dB |
| The Size Of The Film | 8 X 10 Cm To 43 Cm Wide |
|---|---|
| The Running Time | 7 Minutes To 23 Minutes |
| Inlet Velocity | 322~92 Mm / Min |
| Volume (long * Width * Height) | 100 X 70 X 64 Cm (including Stent 106 Cm) |
| Weight | 85 Kg (tank Without Liquid) 115 Kg (filled With Water) |
| On-site | On-site Portable Digital Imaging Inspection |
|---|---|
| A/D Conversion | 16bit High Dynamic Range |
| Resolution | 120μm Pixels, High Resolution 4.0lp/mm |
| Image Window | 25cmX30cm |
| Scintillator | CsI:TI Or GOS |
| Effective Imaging Area Of The Detectorange | 150×180mm |
|---|---|
| Pixel Matrix | 1280×1024 |
| Ray Energy (static KV Value) | 40~300kv |
| Received Ray Energyion | 320kV |
| Continuous Working Time | More Than 10 Hours |
| Material | ABS |
|---|---|
| Testing Range | 1.5~240mm |
| Lifting Clearance | 0~3mm |
| Operating Frequency | 4MHz |
| High Temperature Sound Speed Compensation | Automatic Compensation |
| Material | ABS |
|---|---|
| Measuring Thickness Range | 0.01 Mm ~ 38 M,depending On The Material Being Measured, Probe, Surface Conditions, Temperature And Selected Configuration |
| High Resolution | Regular Display Resolution Is 0.001mm, Optional Ultra-high Resolution Can Reach 0.0001mm |
| Measurement Units | Millimeters, Inches, Microns And Mils |
| High Temperature Measurement | Up To 500°C |