Send Message

surface profile form tester SRT-5100

October 9, 2011

Latest company news about surface profile form tester SRT-5100


* HUATEC Digital Surface Profile Gauge is a handheld gauge for fast and accurate measurement of the peak-to-valley height of the surface profile of blast cleaned surfaces.



* It meets the standards of ASTM D 4417-B, IMO MSC.215(82), SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000. Suitable for the laboratory and for use in harsh field conditions. Accurate, immediate and repeatable results.



* The tungsten carbide tip will last for up to 20,000 readings and can then be easily replaced by the user in the field.



* Cost per test is significantly lower than other test methods.



* Used the exclusive Micro -computer LSI circuit and crystal time base to offer high accuracy measurement.



* Can communicate with PC for recording, printing and analyzing by the optional software and cable for RS232 interface. USB adaptor and Bluetooth interface can also be used.



* Automatic power off to conserve power.



* Widely used in field of blast cleaned surface measurement. If the profile is too large the amount of coating required to ensure adequate coverage increases, otherwise there is a danger that the peaks remain uncoated - allowing rust spots to occur. If the profile is too small, there maybe an insufficient key to produce adequate adhesion, leading to premature coating failure . Ensuring the correct surface preparation optimises the performance of the coating and material usage.



SPECIFICATIONS:



Display: LCD



Range: 0 μm to 800 μm (0 mils to 30 mils)



Accuracy: ±5% or ±5 μm, (whichever is the greater)



Resolution: 1 μm (0.1 mils)



Metric and Imperial switchable



PC interface: RS232C



Measurement speed: >30 (readings per minute)



Power off : 2 modes (Manual off at any time by depressing the



power key till OFF shows on the display or Auto power off after 3



minutes from last key operation.)



Weight: 280 g



Dimensions: 162×65×28mm (6.38" x 2.55" x 2.10")



Operating temperature: 0°C to 50°C (32°F to 120°F)



Case: High impact ABS



Batteries: 4x1.5v (AAA) battery



Accessories:



Main unit……………...1pc.



Carrying case…………1 pc.



Operation manual…….1 pc.



Optional accessories:



RS232C cable, USB adaptor, Bluetooth interface


Get in touch with us
Contact Person : Mr. JingAn Chen
Tel : 8610 82921131,86 13261934319
Fax : 86-10-82916893
Characters Remaining(20/3000)