Ultrasonic Thickness Gauge Meter Metal Plastic Wall Thickness Through Coating Thickness Gauge

Ultrasonic Through Coating Thickness Gauge TG4000, ultrasonic thickness gauge, thickness tester Echo-echo
 
The HUATEC TG4000 is a simple to use, highly accurate, hand-held Ultrasonic Thickness Gauge with the ability to measure through paint and/or coatings. Utilizing it’s state of the art microprocessor and ultrasonic technology the HUATEC TG4000 offers you many outstanding features such as quick scan, extended memory and output. You can now test painted tanks, pipes, etc., without the need to remove the paint or make corrections for the paint thickness. It features reliable and stable readings, standard or dual element measuring modes, convenient data display (in both millimeters and inches),high resolution .01” (0.1mm), ease of operation, low power consumption(two AA batteries). These features make HUATEC TG4000 unequalled in its performance as well as its value!
 
Sound velocity

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TECHNICAL DATA
Display                        128X64 Pixel LCD with backlight
Measuring range     (in two function modes of Standard mode and through coating mode)    
                                       Standard mode        0.8 mm-- 300.0 mm in steel depending on the probe.  Special request can reach measuring range up to 500mm
Through coating mode   2.5 mm – 18.0 mm  (Probe PT-08 and PT-12 )
Through coating thickness: 0-2mm
Tolerance                       +/-0.05 mm in steel
Display resolution         0.1 mm
Built-in standard block   4.00 mm
Memory              500 datas in 5 groups, memory does not lose after powering off
Velocity range                1000-9999 m/s
Power                     2 pcs 1.2 V AAA batteries
Outside dimension         149X73X32 mm
Net Weight           160 g
 
FEATURES
 - Automatic self-calibration
- Couplant indicator
- Automatic power off in 5 minutes and manual power off function
- High-low limit alarm
- LCD brightness adjustable
- Through coating capability
- Low battery indicator
- Two points calibration
- Metric/imperial optional
- Dataview for PC communication
 
 
Measuring
 
Put a small drop of couplant gel on the work-piece, then place the probe on the surface of your sample. The thickness value will display on LCD screen in either mm or inch. The gauge shows the measuring result whenever the probe is coupled with the work-piece for longer than 2 seconds with couplant gel.
 

STANDARD DELIVERY
Ultrasonic Coating Thickness gauge TG4000 main unit with through coating mode
Hard carrying case
Couplant bottle
Standard 8 mm, 5 MHzprobe PT-08 with cable (through coating mode)
Dataview CD and communication cable
 
OPTIONAL ACCESSORIES
4 stepssteel test block
7 stepsmetrics steel test block
5 MHz, 4 mm contact probe
10 MHz, 4 mm, contact probe
5 MHz high temp. probe
Dataview CD and communication cable
Probe cables
Water proof housing