Pipeline Crawler X-Ray Machineemulsion Film Industrial X-Ray Film D7
SIZE AND PACKAGE
|80 x 300||100||10||12.5|
|80 x 360||100||10||15|
|12 x 15||305 x 381||50||5||16.5|
|14 x 17||356 x 432||50||5||20.5|
It can be available in other sizes and quantities of packing on request.
The unexposed image should be stored in a clean, dust-free, hydrogen free, hydrogen sulfide free and radiation-free place. Heat and humidity have an adverse effect on film. It is recommended to store it in a temperature below 21 ° c and humidity below 65%RH. Ideal storage humidity for opened film is 30%RH-50%RH
The film packages should be placed on edge to avoid pressure marking the film.
The film stored in the low temperature should be taken out in advance when using, and stored at room temperature for more than 4 hours before opening the packaging for use, so as to avoid damage to the surface of the film condensation.
The photographic properties of the film will change with the preservation time and should be used within the guarantee period. Exposed film should be processed as soon as possible.
The film should be handled carefully to avoid physical damage from extrusion, folding, twisting and friction. Care should also be taken not to touch the film with wet hands before and after processing.
D7 film photosensitive characteristic curve
Industrial x-ray Film D7 is produced by our company, It is designed in accordance with advanced standard. A series of new materials and technology be used from emulsion-marking to coating. It is an ideal film for industrial non-destructive inspect ion photographing.
FEATURES AND USAGES
D7 industrial film adopts blue polyester film as its supporting body, coated with photosensitive emulsion film on both sides. It is a kind of film with fast ray photosensitive speed, micro particles and high contrast. Its fine silver halide crystal particles, good distribution state, specially processed photosensitive coating and reasonable coating structure enable it to have the ability of distinguishing defects with high quality. It is widely used in nondestructive X-ray detection of components, profiles, parts or welds made of ferrous metals, nonferrous metals and their alloys or other materials with smaller decay coefficients.
This product can be used as a safety light for developing, processing or inspection with lz-2 or No.2 dark red safety light with transparency greater than 630nm. The 15-watt bulb should be at least 1.2 meters away from the film.
Industrial x-ray Film D7 type industrial amine sheet washing process can be manual washing at room temperature, also can be high temperature machine. The process conditions of manual flushing at room temperature are as follows:
|development||20||5 minutes||D 19B|
|wash||normal temperature||5-10 seconds||water|
|fix||normal temperature||5 minutes||F-5|
|wash||normal temperature||10 minutes||flowing water|
Exposure and flushing conditions:
|X-ray machine||GE E320||washing machine||protec|
|Lead screen||0.03mm||Medicine set||President of G - 30|
|FFD||1m||Automatic Flushing||8 minutes|
|density||2.5||Developing temperature||28 ℃|
Storage and shelf life
This film should be stored in a low temperature dry place, the best storage conditions are temperature 10℃ ~ 23℃, relative humidity 30% ~ 65%. Should be strictly avoided in high temperature, high
Stored in wet, radioactive and chemical gases, avoid to store in the same room with processing liquid medicine, and should be used within the validity period, product shelf life of 30 months.
Matters needing attention
1. The film stored at low temperature should be taken out 2 hours in advance before use, and placed at room temperature for more than 2 hours to ensure the temperature of the film and the use environment
The temperature balance is consistent, and then open the film packaging, in order to avoid the formation of water vapor on the surface of the film caused by the adhesion between the films and affect the film picture effect,
To ensure the normal use of film.
2. The film should be unsealed, loaded and rinsed under the safety lamp. The film should not be exposed for too long under the safety lamp
Contaminated film, film should be handled with care to avoid friction. After unsealing, the film should be used up as soon as possible, and the unused film should be sealed according to the original package.
MSDS of HUATEC D7 film
MATERIAL SAFETY DATA SHEET
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
Product Name: industrial radiographic film
Usage: nondestructive test
Manufacturer: HUATEC Group Corporation
Address: 7th Chengyuan Building B Jiancaicheng zhonglu Haidian Beijing 100096, China
Phone Number: 86-10-82921131 13910983110
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
This product is a mixture
SECTION 3: HAZARDS IDENTIFICATION
nonflammable, nonexplosive, not corrosive, nonradioactive, no chemical, physical, or biological hazard
Physical hazard: sharp edge may hurt skin
Environment impact: recyclable and nonhazardous
Special hazard: none
SECTION 4: FIRST-AID MEASURES
Skin Contact: nonhazardous
Eye Contact: go to see a doctor if get injured.
Ingestion: vomit, and go to see a doctor
SECTION 5: FIRE-FIGHTING MEASURES
Danger characteristic:nonflammable, nonexplosive
Hazardous Combustion Products: Carbon oxides, nitrogen oxides
Fire extinguishing agent: Water, powder, Foam, or carbon dioxide
Attention in firefighting: shoot water, or other fire-extinguishing agents, towards the burning material. When fighting the fire, wear protective device as needed to avoid inhaling and/or skin contact with the burning substance or smoke.
SECTION 6: ACCIDENTAL RELEASE MEASURES
The material is solid, so not applicable.
SECTION 7: HANDLING AND STORAGE
Handling: Handling in darkroom only, because the material is photosensitive
Storage: Store in a waterproof, cool, shady dry, well-ventilated place.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters/Occupational Exposure Limits: none
Engineering Controls: none
Respiration protection: none
Eyes protection: none
Body protection: work cloth
Hand protection: gloves
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance Physical State: sheets or rolls, thin film when unrolled, weak odor
Relative Density(water＝1): >1
Melting Point: N/A
Boiling Point: >100℃
Flash Point: N/A
Explosive Lower Limit: N/A
Explosive Upper Limit: N/A
Vapor Pressure: N/A
Vapor Density: N/A
Solubility in Water: insoluble
Partition Coefficient: N/A
Auto-Ignition Temperature:N/A (nonflammable)
Recommended Usage: nondestructive test
SECTION 10: STABILITY AND REACTIVITY
Chemical Stability: Stable under normal temperature and pressure.
Reactivity/Incompatible Materials: strong oxidant, strong reductant.
Conditions to avoid: high temperature, sunshine or illumination, damp.
Hazard of polymerization: not polymerized
Products of decomposition: unknown
SECTION 11: TOXICOLOGICAL INFORMATION
Acute Overexposure: unknown
Chronic Overexposure: unknown
SECTION 12: ECOLOGICAL INFORMATION
Eco-toxicity Data: no data available
Biodegradability: no data available
Abiotic degradation: no data available
Biological concentration or accumulation: no data available
Other hazard: no data available
SECTION 13: DISPOSAL CONSIDERATIONS
Classification of wasted material: industrial solid waste
Way of disposal: all the wasted or leftover materials should be collected and disposed according to local regulation
Attention in disposal: keep the material away from water
SECTION 14: TRANSPORT INFORMATION
Number of dangerous goods: N/A
UN Number: None
Packing Group: Ⅲ
Package: internal package is plastic vacuum bags; external package is corrugated cardboard boxes
SECTION 15: REGULATORY INFORMATION
SECTION 16: OTHER INFORMATION
Date: Sep. 20, 2019
Checked by:Safety professional management dept.
|Tel :||8610 82921131,86 13910983110|