Pre-grinding machine YM-1

October 23, 2012


Description:
The pre-grinding of the specimen is an indispensable process before its polishing in the preparation of the specimen.The pre-grinding enhances greatly the efficiency of the specimen praparetion.YM-1 Pre-grinder is the result of a large-scale research work and the wisdom of the designers as well as the suggestions of the users.As an excellent piece of specimen pre-grinding,the pre-grinder has a lap with a larger diameter compared with the same kind of machines produced in our country and the rotational speed of its lap is quite different form that of the machines turned out in our country in order to meet the requirements of the pre-grinding of various materials.   

The working principle of YM-1 Pre-grinder is as follows:clear water provided by a water tube flows into the rotating lap and the abrasive paper flowing over the water throws the water out of the lap as the result of the excentric force of the ratating lap forming a vacuum space before the atmospheric ressure presses the abrasive paper on the lap tightly.Now it is time to operate the pre-grinding.When the lap stops rotating,the work is done and abrasive paper can be easily taken off.



Main parameters

The Diameter of the Lap:250mm

The Diameter of the Abrasive Paper:230mm

The Electric Motor:YS7118,0.2KW,380V,50Hz

Total Dimension:460*340*330mm

The Rotational Speed:700r/min

The Net weight:22kg

 

Get in touch with us
Contact Person : Mr. Davis Chen
Tel : 8610 82921131,86 13910983110
Fax : 86-10-82916893
Characters Remaining(20/3000)