| ¡¡
SMART-97 Eddy Current
Detector
The portable SMART-97 is a versatile
eddy current instrument with
full-digital, double frequency, multi-channel. This intelligent tester is
designed for real-time effectively defect detection of metal materials,
thickness measurement and sorting materials by metallurgical differences.
The SMART-97 is built in with battery, its weighty is light and size
small. SMART-97 is a multi-purpose instrument which tests conductive
materials using the eddy current test method. Testing capabilities
include: tube testing of heat exchangers, weld inspection, assembly line
inspection, and other useful broad of eddy current applications. The audio, visual and logic
output alarms can determined flaw conditions.
Feature:
¡õComplex plane EL
¡õLightweight,
portable, operates on battery or line power input
¡õFrequency
range of 64Hz~2MHz
¡õ2
independently-selectable frequencies
¡õAdjustable
gain from 0 to 48dB in 0.5dB steps
¡õAdjustable
in 1-degree steps from 0 to 360 degrees
¡õFast
analog / digital electronic balancing (option)
¡õAdjustable
sample rate.
¡õRS232
serial interface.
¡õMicroprocessor-based
design.
¡õBuilt-in
detachable battery pack and battery charger
¡õX
, Y and X-Y outputs
Basic Instrument Specification
Frequency
Range: Two-independently-selectable
frequencies, 64Hz to 2MHz, Adjustable from the touch control panel.
Display: EL Display presents a two-dimensional image of
impedance plane and 3 display mode setable. All
Instrument settings are
shown on the display.
Outputs: The horizontal (X) and vertical (Y) components of the
final eddy current signals, and impedance
plane (X-Y) are available.
Printer interface:
Allows screen dumps to optional 1600K Printer
through RS232 interface.
Power Requirements£º220VAC, 50Hz Will operate instrument and recharge the storage batteries.12
VDC Will operate instrument too.
Storage battery£ºNominal 12 VDC battery pack comprised of 8
ampere-hour size D cells. in series. The battery life is good for at least 1000
recharge cycles and will operate the unite for minimum period of 8 hours
with batteries fully charged at 21 degree.
Size£º
300¡Á265¡Á126 ( L¡ÁW¡ÁH mm3 )
Weight:
4.5Kg
Sample
Application
¡õGeneral defect detection and evaluation
¡õInspection of bolt holes for cracks
¡õDetection of heat damage (from friction or fire: For example, localized heat damage on machined parts,fire damage to aircraft fuselage)
¡õDetection of variation(wear, corrosion, manufacturing variations etc
.)on thin materials.
¡õEvaluating thickness of non-conduct coatings on a conductive base.
¡õEvaluating thickness of conduct coatings on a non conductive base.
¡õDetecting variations in heat treating (between entire small parts, or
over the surface of a larger test piece)
¡õTesting of non-ferrous heat exchanger tubing with
I.D. probe/coil for crocking, wall thinning, corrosion
¡õEvaluation
of plating thickness
¡¡
|
